GL-5/MT-1
LSD |
合成油型
Synthetic Oil |
API MT-1/GL-5
MIL-2105E
MACK GO-J
PG-2 Limited Slip |
適用於特別嚴重負荷作業下之車輛變速齒輪及Hypoid Gear之差速齒輪、LSD(防滑差速器)齒輪
Suitable for vehicle transmission gears and Hypoid Gear differential gears under particularly severe load conditions, and LSD (Limited Slip Differential) gears. |
- 合成齒輪油以高精煉度基礎油，加入特殊調配的極壓、防滑差速、硫磷型添加劑等等，超越傳統齒輪油極限，大幅提升後軸與差速器的性能，不論是高温運轉或低温的操作狀態下，皆可保有更佳的油膜強度，較傳統礦物油具備更多優勢。
- 本類油料不但適用於Hypoid型齒輪，亦廣用於其他型式之齒輪，如正齒輪、斜齒輪螺旋齒輪及齒輪等。
- Synthetic gear oil uses highly refined base oil, with specially formulated extreme pressure, anti-slip differential, sulfur-phosphorus type additives, etc., exceeding the limits of traditional gear oils, significantly improving the performance of the rear axle and differential. It maintains better oil film strength under both high-temperature operation and low-temperature operating conditions, and has more advantages than traditional mineral oils.
- This type of oil is not only suitable for Hypoid gears, but also widely used for other types of gears, such as spur gears, helical gears, spiral bevel gears, and worm gears.
|
| GL-5 |
礦物油型
Mineral Oil |
GL-5 MIL-2105D |
適用於特別嚴重作業下之車輛變速齒輪及Hypoid Gear之差速齒輪
Suitable for vehicle transmission gears and Hypoid Gear differential gears under particularly severe operation. |
- 採用高度精製的基礎油，配合極壓劑、酸化防止劑、消泡劑等添加劑研製而成的最高級車輛用齒輪油。
- 耐載重、耐磨耗性極優，自動車及產業車輛的差速齒輪和鐵道車輛的高速萬用接頭裝置等最適合使用。
- 優異的油肌性，顯著的减低齒面及軸承的磨損，特別優異的氧化安定性可以防止油質的劣化，即使在高溫環境作業下亦能防止油泥形成及粘度的增加。專為戟齒輪在最嚴苛條件下工作的雙曲面齒輪及承受衝擊負載齒輪而配製。
- The highest grade automotive gear oil made from highly refined base oil blended with extreme pressure agents, antioxidants, and antifoaming agents.
- Excellent load-bearing and wear resistance, making it most suitable for differential gears in automobiles and industrial vehicles, and high-speed universal joint devices in railway vehicles.
- Excellent oiliness, significantly reducing wear on tooth surfaces and bearings. Particularly excellent oxidation stability can prevent oil deterioration, and prevent sludge formation and viscosity increase even under high-temperature operating conditions. Specifically formulated for hypoid gears and gears subject to shock loads working under the most severe conditions.
|
| GL-4 |
礦物油型
Mineral Oil |
GL-4 |
適用於轎車、商用車、農耕機和營建設備之手排變速箱、後輪軸及動力方向機等。不適用於Hypoid Gear
Suitable for manual transmissions, rear axles, and power steering systems of passenger cars, commercial vehicles, agricultural machinery, and construction equipment. Not suitable for Hypoid Gear. |
符合國際標準多用途中等負荷之戟齒輪油
Meets international standard multi-purpose medium load gear oil. |
